Building a French Companion

Above you can see the French Companion I recently built. The French Companion is smaller than the French Mistress but they both look and do the same thing. I decided to build mine because I had the scrap wood laying around from past projects and didn't feel like waiting for the FC to be shipped had I ordered one online. At this moment the FC is on sale at ASW for $52.99.

Here is how I built mine. The panels are 3/16 Luan I had purchased a while back at Home Depot. First I cut three panels of luan. These measured 13x16 and two 13x8. Then I cut pieces of 5/8 x5/8 strips of wood to fit along the edges of the panels. These are just butt jointed, nothing fancy. The frame strips are just pine that was cut from an old piece of 2x4. I glues these to the panels and then shot in a few brads to reinforce them (you could use short finishing nails too).

I then went to Ace hardware and bought 2 12" piano hinges for $8 a piece. Once I had those I lined up the panels and installed the hinges.

 I then stained it with red oak stain and then waxed it with the Howards Feed N Wax. Here is the view of the box closed. for transport.

A view of the box open ready to be sat on the drawer of the French easel. I was going to buy some small latches to keep the doors closed but couldn't find any. I'll hunt online for those. A bungy cord will work for now.

Ready for action! It's that simple...cut panels to size, glue and nail on wood frame strips, screw on hinges, stain and wax....Use! It gives ample room now when using the French easel to lay out your paints, palette knives, turps, coffee cup, donut, and has a nice amount of room to mix paint. Very easy to build.